Restrict Access Vlan with WLC 4402

[danielnunes]

Folks, I have three SSID configured on WLC and three groups configured on ACS and I need to restrict SSID access based on ACS group.

I tried to use this guide below.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml

How you can see, this example is aplicable to 802.1x and work out fine with 2 SSIDs that I have but the third SSID don't work because it use the NAC Web login to Auth the user, I needed to fallback because this configuration blocked my NAC Authentication.

Although I have configured NAR just Group2 and Group3, users on Group1 that are Auth with NAC were blocked.

Anyone Know Why this or How can i configure this restriction on WLC and ACS?

thanks a lot

[Erick Delgado]

Hi,

You could be hitting DDTS CSCdu52690.

I will suggest to do an upgrade ACS version 3.0 is old and unsupported.

Thanks,

[Erick Delgado]

Please dismiss previous message.