cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

290
Views
0
Helpful
0
Replies
Highlighted
Beginner

Setting up Dot1x with ACS5.2

Help! I've been trying to setup and  test Dot1x and can't seem to get it working.

I have an:

ACS5.2

Catalyst 2950

Win 7 Client

I think everything is configured as it should be with the Switch and ACS but not sure if I have done the Win 7 Client correct.

In the ACS logs I can see the Authentication request come in but it fails with message 'Misconfigured EAP on ACS or Network Device'. Now I don't want to use Certificates so I set the Win 7 Client to use Microsoft PEAP in the 802.1x auth settings:

802.1xtab.JPGPEAPtab.JPG

The logs in ACS show the username I use but the Authentication type says it's trying to use EAP-TLS, is that right?

How can I get this working?

Thanks

Stuart

Everyone's tags (4)