cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

3374
Views
0
Helpful
5
Replies
Highlighted
Beginner

SSH to ACS SE

I could not SSH to ACS SE appliance? Any idea why I could not, however I can do on another ACS SE.

Please note that I can ping the ACS SE, after disabling the CSA, so netowrk connectivity is ok.

Cisco Secure ACS: 4.2.0.124.

Thanks and Regards,

5 REPLIES 5

Re: SSH to ACS SE

I could not SSH to ACS SE appliance? Any idea why I could not, however I can do on another ACS SE.

Please note that I can ping the ACS SE, after disabling the CSA, so netowrk connectivity is ok.

Cisco Secure ACS: 4.2.0.124.

Thanks and Regards,

Hi,

Can you check in ACS GUI under reports & activity under Appliance status page and check TCP port 22 is opened or not in ACS SE,If yes then check between your system and ACS SE any firewall is there if yes then also open port 22 in firewall also.

HTH

Ganesh.H

Beginner

Re: SSH to ACS SE

Hi Ganesh,

Thank you for your response.

TCP port 22 is open, and there is no firewall between system and ACE SE.

Thanks and Regards,
Shahzad.

Re: SSH to ACS SE

Hi Ganesh,

Thank you for your response.

TCP port 22 is open, and there is no firewall between system and ACE SE.

Thanks and Regards,
Shahzad.

Hi Shahzad,

If there is no firewall between the ACS and client and port 22 is open then i would suggest you to try restart the ACS services and then check are you able to get ssh prompt.

Hope to Help

Ganesh.H

Beginner

Re: SSH to ACS SE

Hi Ganesh,

Thank you for your response. I will already tried to restart the ACS, but it does not worked. I have tried to access the ACS from a system on the same subnet as of ACS, but it also did not worked.

Thanks and Regards,
Ahmed Shahzad.

Beginner

Re: SSH to ACS SE

Try SSH v1.