I have a tacacs server running for accounting purpose only (so I use local authentiation). So I can collect all accounting logs only.
This is a snapshot for accounting part.
Tacacs accounting logs
<102> 2014-02-23 10:20:22 [10.254.1.2:22823] 02/23/2014 10:20:22 NAS_IP=10.254.1.x Port=443 rem_addr=10.254.50.129 User= brian Flags=Stop task_id=57 cmd=perfmon interval 10 service=shell elapsed_time=0
<102> 2014-02-23 10:23:51 [10.254.1.2:58167] 02/23/2014 10:23:51 NAS_IP=10.254.1.x Port=0 rem_addr=10.254.50.129 User=brian Flags=Stop task_id=58 cmd=configure term service=shell elapsed_time=0
<102> 2014-02-24 07:06:31 [10.254.1.2:19784] 02/24/2014 07:06:31 NAS_IP=10.254.1.x Port=443 rem_addr=10.254.51.166 User=mike Flags=Stop task_id=59 cmd=perfmon interval 10 service=shell elapsed_time=0
<102> 2014-02-24 07:07:53 [10.254.1.2:19254] 02/24/2014 07:07:53 NAS_IP=10.254.1.x Port=0 rem_addr=10.254.51.166 User=mike Flags=Stop task_id=5a cmd=configure term service=shell elapsed_time=0
As you can see, I can't see any command lines, such as show int ip b. I can see all routers and switches logs, but ASA logs shows only like above. No mather what commands I used, it only shows above logs. Do i miss something? I like to capture all commands lines when users use ASDM because we use always ASDM.
I used Free tacacs+ server, not ACS.
Thanks for your time.
