cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

41
Views
0
Helpful
0
Replies
Beginner

Unable to move ports to Auth (clear access manager)

Hi Guys,

We are trying to integrate new switches in CAM/CAS but unable to do so. The devices are getting added in the CAM and we could bounce the ports assigned to vlan profile. But the issue is with the port not moving to/via AUTH vlan when user turns off the PC connected on the port.

The switch is located in the DC LAN where CAM/CAS is connected. There is no issue with the switches at the remote branches and working absolutely fine.

The switches at DC LAN are  C3750x running 15.0. We have tried using series 12.2(58) but that didn't help.

Let me know if there is anything thats is not as per NAC requirement or to be verified in the configurations or CAM/CAS  servers itself.

Best regards,

Santosh