cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
824
Views
0
Helpful
1
Replies
Highlighted
Beginner

Unauthorized policy server on Anyconnect System scan

Hello guys,

i faced this message when client customer machine try to chek compliance ''Unauthorized policy server''.

when i tried with my machiine this message doesn't appear.

FYI: i'm in process of configuring posture assisment for remote access VPN.

any idea please!

 

Regards,

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unauthorized policy server on Anyconnect System scan

Hello! I resolved this on my side. If you previously tested your AnyConnect posture with a different deployment and now are trying a new one, you will get this error even if you configure on ISE the allowed server to be *. You need to go to the AnyConnect ISE Posture folder and delete the XML file there or edit it and remove the previously allowed server.

 

Good luck.

1 REPLY
Cisco Employee

Re: Unauthorized policy server on Anyconnect System scan

Hello! I resolved this on my side. If you previously tested your AnyConnect posture with a different deployment and now are trying a new one, you will get this error even if you configure on ISE the allowed server to be *. You need to go to the AnyConnect ISE Posture folder and delete the XML file there or edit it and remove the previously allowed server.

 

Good luck.

CreatePlease to create content
Ask the Expert- Webex Hybrid Services Solutions