09-09-2018 10:01 AM - edited 03-11-2019 01:49 AM
Hello,
I want to ask about Configuration WCCP on my Catalyst 6509.
This is the topology:
This is WCCP configuration on my device 10.204.20.1:
ip access-list standard WAVE
permit 10.204.19.68
ip access-list extended WAAS-REDIRECT-LIST
permit tcp any 10.141.1.0 0.0.0.255
permit tcp 10.141.1.0 0.0.0.255 any
ip wccp 61 redirect-list WAAS-REDIRECT-LIST group-list WAVE
Interface Eth1/1
ip wccp 61 redirect in
Interface Eth1/2
ip wccp 61 redirect in
What I confused is:
1. Can I configure with only WCCP 61?
2. Can I only use it to intercept that traffic and send packet to my WAE (10.204.19.68)?
3. Can you explain what function of this command "ip wccp 61 redirect-list WAAS-REDIRECT-LIST group-list WAVE"?
09-09-2018 10:57 AM
3. Can you explain what function of this command "ip wccp 61 redirect-list WAAS-REDIRECT-LIST group-list WAVE"?
When you specify the ip wccp redirect-list command, only packets that match the access list are redirected.
09-09-2018 11:40 AM
Hi balaji,
And, can you answer my question number 1 and number 2?
09-09-2018 11:52 AM - edited 09-09-2018 11:53 AM
Yes and possible. if you understand which side you are interception the traffic.
09-09-2018 11:56 AM
So, how is about Service Group 62 ?
is not need configure it wccp 62 on the WAN Link?
09-09-2018 11:58 AM
Depends on your requirement.
This example document explains more information for your understanding.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: