cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1167
Views
5
Helpful
4
Replies

VPN Access Control Policy

Arif
Level 1
Level 1

Hi;

 

I want to set Access Control policy for VPN on ASA 5516-X .

 

I think make this settings, are they true ?

Source Zone : Outbound

Destination Zone : Inbound

Source Network : VPN Network

Destination Network : File Servers Network

Ports: ? (I want to use IKEv2-IPsec Protocols, what port must I open)

 

Additional Question :

I install Radius for AAA, is this requires add a policy for this thanks...

 

 

 

 

 

 

4 Replies 4

Hi,

You don't have to open any ports for IPSec, but you do need to configure the ASA to enable ikev2 on the outside interface.

 

Which OS image are you using FTD or ASA?


Here is an example of Remote Access VPN using FTD or ASA both examples are integrated with a RADIUS server (ISE).

 

HTH

Hi;

 

Our Os is : Cisco Fire Linux OS

Ok, so you are using FTD image then.

Thank RJI for usefull information.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: