I have an issue with my ISE's. I currently have 2 VM's set up in a ressiliant pair. I am able to SSH to both of them fine but when I try and load the web login it gives me page can't be displayed. I have checked all firewalls to make sure port 443 is open. I have proved connectivity by telneting to the ISE's on port 443 but still the page will not show.
Can you please let us know which version of ISE is deployed in your environment.
Can you please login to CLI and check the services of Primary ISE. The command to be used is
"show application status ise"
For example :
node1-poda/admin# show application status ise
If services are not running please use "application start ise" to start the services.
node1-poda/admin# application start ise
Hi thanks for getting back to me. I am running version 184.108.40.2069
All applications are running and ISE has been rebooted. Still no luck.
To give some further information when I try to connect to the web page it asks me to install a certifcate given out by our CA which I have checked and is installed on my pc.
Are you making use of supported browser like IE or Firefox. Safari and Google chrome are not supported.When you try to login to Web of ISE , it will ask for the certiicate to install. Once done it will take to login page.
Also can you please attach screen shot with error seenon browser. If IP restriction is enabled on ISE and if you are trying to access from other IP who has no privilege to access UI, it will throw 404 error.
Unfortunalty I am unable to do that as I am in a high security site. I can confirm that the web browser says Internet Explorer cannot display the webpage. I am not getting a 404 error!
Can you please check this ,
The Cisco ISE user interface does not support using the Microsoft IE8 browser in IE7 compatibility mode. The Microsoft IE8 is supported in its IE8-only mode.
Also if possible can you please try accessing from Mozilla browser if you are having access .