WLC MAB with airespace interface

[Eric Marshott]

We have ISE 2.2 with WLC's running 8.2 and WLAN running mab.

I want to put certain devices connecting to this WLAN (using identity group/mac-address) into certain WLAN interface.

I have tried using Airespace:Airespace-Interface-Name = <name of interface on WLC> and ACCESS_ACCEPT.

It seems the WLC is not accepting the airespace interface name AV pair, and it is taking only the ACCESS_ACCEPT.
Does this mean that WLC with WLAN running mab does not support CoA?
Is there a workaround or other solution to this?

Thank you kindly
-Eric M

[Sathiyanarayanan Ravindran]

Hi @Eric Marshott 

WLC will support the change of authorization through Radius.

Instead of interface name use the VLAN ID on the policy results. It will work. Make sure that AAA Override is enabled on the controller.

Refer : Dynamic VLAN Assignment Through ISE