cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
configure & troubleshoot anyconnect
165
Views
10
Helpful
1
Replies
Beginner

WLC MAB with airespace interface

We have ISE 2.2 with WLC's running 8.2 and WLAN running mab.

I want to put certain devices connecting to this WLAN (using identity group/mac-address) into certain WLAN interface.


I have tried using Airespace:Airespace-Interface-Name = <name of interface on WLC> and ACCESS_ACCEPT.

It seems the WLC is not accepting the airespace interface name AV pair, and it is taking only the ACCESS_ACCEPT.
Does this mean that WLC with WLAN running mab does not support CoA?
Is there a workaround or other solution to this?

Thank you kindly
-Eric M

1 REPLY 1
Highlighted

Re: WLC MAB with airespace interface

Hi @Eric Marshott 

 

WLC will support the change of authorization through Radius.

 

Instead of interface name use the VLAN ID on the policy results. It will work. Make sure that AAA Override is enabled on the controller.

 

Refer : Dynamic VLAN Assignment Through ISE

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)