Hello everyone,
I want to remove the following "call-home" setting from configuration (NVRAM) or stop it from showing by show runn command on Cat6500 12.2(33)SXH4.
Is it possible or I can't remove it?
If possible, could you please let me know how can do it.
=====
call-home
alert-group configuration
alert-group diagnostic
alert-group environment
alert-group inventory
alert-group syslog
profile "CiscoTAC-1"
no active
no destination transport-method http
destination transport-method email
destination address email callhome@cisco.com
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
subscribe-to-alert-group diagnostic severity minor
subscribe-to-alert-group environment severity minor
subscribe-to-alert-group syslog severity major pattern ".*"
subscribe-to-alert-group configuration periodic monthly 26 14:24
subscribe-to-alert-group inventory periodic monthly 26 14:09
=====
I understand the default setting of Call Home feature is disabled, but I want to remove it.
Thanks and regards,
Shinichi
