cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

7960G Factory Reset Problem

mattbolton
Level 1
Level 1

Hi all,

So I picked up a couple of 7960G's running SIP. Naturally they are password locked and the default passwords "Cisco" and "cisco" do not work. I have tried the hold down "#" at boot and this does nothing.

Firmware is POS3-06-3-00

Boot Load - PC030301

DSP Load - PS03AT38

To repeat, the accepted solution of "power off" > "hold down # key" > "lights flash in sequence" does not work on either handset. Is there another "secret" reboot method for this firmware version?

Who Me Too'd this topic