I have 2 1242AG APs setup with one SSID and no vlans configured. The APs are connected to a switch along with my DHCP server. Clients are able to connect to the SSID but are unable to get an IP from the server. Clients can plug into the switch and get an IP. If I configure a static IP on the wireless card, the client works fine.
Is there something I'm missing on the AP to allow DHCP requests to pass through? IPhelper?
Here is the AP info:
AIR-AP1242AG-A-K9
12.4(21a)JA1
Thanks.
John
