11-22-2010 07:40 AM - edited 03-06-2019 02:09 PM
hello,
I have 3 348G switches connected in eiasy chain fashion on gig0/0 and gig0/1 ports. My problem is that when I do "show cdp neighbor" command, it show switch seeing itself on some of fastethernet ports. fastethernet ports are all connected PCs. the closet is wired with old type 1 cable for token ring, but later conneverted into ethernet.
Please if any has anybody have a clue of this, let me know.
thank you.
WITCHNGS2 Fas 0/24 173 S I WS-C2950G-Fas 0/24
WITCHNGS2 Fas 0/15 173 S I WS-C2950G-Fas 0/15
SWITCHNGS2 Fas 0/9 173 S I WS-C2950G-Fas 0/9
WITCHNGS2 Fas 0/8 173 S I WS-C2950G-Fas 0/8