02-01-2011 07:40 AM
Hi,
I want configure a ASA 5505 with software 7.2(4) and license Dual ISPs and when I configure two interfaces with security level 0 in two interfaces and enable vpnclient the follow message appear:
ERROR: Unable to determine Easy VPN Remote internal and external interfaces: multiple interfaces with the same security levels.
configuration vpnlclient above:
vpnclient server x.x.x.x x.x.x.x
vpnclient mode network-extension-mode
vpnclient nem-st-autoconnect
vpnclient vpngroup TUNNEL_EZVPN_TUNNELSPEC password ********
vpnclient username usr_ezvpn_tunnelspec password ********
vpnclient enable
interfaces:
interface Vlan200
nameif outside1
security-level 0
ip address x.x.x.x 255.255.255.252
!
interface Vlan300
nameif outside2
security-level 1
ip address x.x.x.x 255.255.255.128
!
sla monitor to routing:
sla monitor 100
type echo protocol ipIcmpEcho 200.221.2.45 interface outside1
num-packets 5
frequency 30
sla monitor schedule 100 life forever start-time now
sla monitor 200
type echo protocol ipIcmpEcho 200.154.56.80 interface outside2
num-packets 5
frequency 30
sla monitor schedule 200 life forever start-time now
sla monitor 300
type echo protocol ipIcmpEcho 4.2.2.1 interface outside1
num-packets 5
frequency 30
sla monitor schedule 300 life forever start-time now
sla monitor 400
type echo protocol ipIcmpEcho 200.244.168.149 interface outside1
num-packets 5
timeout 3000
threshold 3000
frequency 30
sla monitor schedule 400 life forever start-time now
Tracking:
!
track 1 rtr 400 reachability
!
track 2 rtr 200 reachability
!
routes:
route outside1 0.0.0.0 0.0.0.0 x.x.x.x 100 track 1
route outside2 0.0.0.0 0.0.0.0 x.x.x.x 200 track 2
The track is working normal.
Regards!
Solved! Go to Solution.