05-24-2011 09:21 AM
Hi ,
We have a requirement where-in we need to configure 2 vpn tunnels to the same remote peer.
Also the remote end local ip address ranges are the same. Below is a quick explanation
Tunnel 1
MyPeerPublicIp = 1.1.1.1
RemotePeerPublicIp = 2.2.2.2
MylocalSubnets = 10.1.1.0/24
RemoteLocalSunbets = 10.2.1.0/24
Tunnel 2
MyPeerPublicIp = 1.1.1.1
RemotePeerPublicIp = 2.2.2.2
MylocalSubnets = 10.1.2.0/24
RemoteLocalSunbets = 10.2.1.0/24
The VPN devices at both ends are Cisco ASA. I am using version 8.0
My confusion is about the following questions
1. Is it possible to have 2 vpns to the same peer ip? (I think yes)
2. If yes, will it require me to configure 2 pre-shared keys?
3. It there any other important considerations I need to make/remember?
Any help on this issue will be much appreciated. Thank in advance.
Regards,
Nilesh