Hi all, I am trying to set up a DHCP Ipv6 server, but when I connect my machine to the network My machine is not getting and IPv6 address neither the DNS address. If I statically configure an Ipv6 address on my machine I am able to ping my default Gateway “2800:410:3082:1::1” and go to the Internet it works fine with static, but I want it the Ipv6 address be assigned by DHCP.
Can anyone please assist me, thanks advance for your help.. This is the configuration I am Using,,
Danny
Router#sho ver
Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(11)XW10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Thu 05-Feb-09 22:10 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T10, RELEASE SOFTWARE (fc1)
Router uptime is 6 minutes
System returned to ROM by reload at 18:08:45 UTC Fri Jun 24 2011
System image file is "flash:c3845-advipservicesk9-mz.124-11.XW10.bin"
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 3845 (revision 1.0) with 222208K/39936K bytes of memory.
Processor board ID FTX1302A34G
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
62720K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
!
ipv6 dhcp pool IPV6_1
prefix-delegation pool pool1 lifetime 1800 600
dns-server 2001:470:20::2
domain-name btl.net
!
ipv6 dhcp pool IPV6_2
prefix-delegation pool pool2 lifetime 1800 600
dns-server 2001:470:20::2
domain-name btl.net
!
multilink bundle-name authenticated
!
voice-card 0
no dspfarm
!
archive
log config
hidekeys
!
!
interface GigabitEthernet0/0
description --To 7609 MPE1_ON PORT 3/3--
no ip address
duplex full
speed auto
media-type sfp
ipv6 address FDDF:1:1:1000::/64 eui-64
ipv6 enable
!
interface GigabitEthernet0/1
no ip address
duplex full
speed auto
media-type rj45
ipv6 enable
!
interface GigabitEthernet0/1.998
description **To Customers**
encapsulation dot1Q 998
pppoe enable group global
ipv6 address 2800:410:3082:1::1/64
ipv6 enable
ipv6 nd managed-config-flag
ipv6 nd other-config-flag
ipv6 dhcp server IPV6_1
!
!!
ip http server
no ip http secure-server
!
ipv6 route ::/0 FDDF:1:1:1000:C671:FEFF:FE02:8D40
ipv6 local pool pool1 2800:410:3082:1::/64 64
ipv6 local pool pool2 2800:410:3082:2::/64 64
