Who Me Too'd this topic

mile.ljepojevic · ‎07-09-2011

After command clear route, all timers just continue, there is not actually clearing the routing table... This is happening on two different boxes: pair of ASA 5520 and one 5505 ASA... I presume it is happening on all others too, but I don't have this release installed anywhere else...

It seems as a major bug. I hope someone here will shed some light on this:

ciscoasa# sho route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is 192.168.254.100 to network 0.0.0.0

D 192.168.102.1 255.255.255.255

[90/156160] via 192.168.254.100, 0:35:05, outside

C 192.168.254.0 255.255.255.128 is directly connected, outside

C 192.168.1.0 255.255.255.0 is directly connected, inside

D 192.168.100.1 255.255.255.255

[90/156160] via 192.168.254.100, 0:35:05, outside

D*EX 0.0.0.0 0.0.0.0 [170/28160] via 192.168.254.100, 0:35:05, outside

ciscoasa# clear route

ciscoasa# clear route outside