Hi there,
I'm working on Cisco UCS C210 M2 server. I got 10 146 GB SAS HD with LSI MegaRAID Raid Controller. I did run the Raid Controller and choose RAID6. After that I installed ESXi and it said reboot the server. Now when I reboot the server I get the following error message:
PXE-E61 : Media test failure, check cable
PXE-M0F: Exiting Boradcom PXE ROM
Reboot and Select proper Boot dervice
or Insert Boot Media in selected Boot device and press a key
Any suggestions how I can solve this issue.
Thanks.
