08-25-2011 02:34 AM - edited 03-04-2019 01:24 PM
Hi,
I want to set the boot file to a new IOS image. What's the difference between "boot system flash {file}" and "boot system flash flash0:{file}" ?
In my router I have the following:
TNRTAGCS00003#dir flash:
Directory of flash0:/
1 -rw- 62558836 Jan 14 2010 06:54:34 +00:00 c2900-universalk9-mz.SPA.150-1.M1.bin
2 -rw- 2903 Jan 14 2010 07:02:10 +00:00 cpconfig-29xx.cfg
3 -rw- 2915328 Jan 14 2010 07:02:22 +00:00 cpexpress.tar
4 -rw- 1038 Jan 14 2010 07:02:30 +00:00 home.shtml
5 -rw- 115712 Jan 14 2010 07:02:38 +00:00 home.tar
6 -rw- 1697952 Jan 14 2010 07:02:56 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
7 -rw- 415956 Jan 14 2010 07:03:06 +00:00 sslclient-win-1.1.4.176.pkg
8 -rw- 64383836 Aug 24 2011 15:49:20 +00:00 c2900-universalk9-mz.SPA.151-1.T2.bin
260153344 bytes total (128045056 bytes free)
Solved! Go to Solution.