08-10-2011 08:47 PM
Sorry for my poor english. My SG300-52 is struck in reboot loop after i set tcp congestion avoidance in webui.
********************************************
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.4 Built 08-Apr-2010 16:37:57
# #
### ###
### ###
### ###
# ### # # ### #
### ### ### ### ### ###
# ### ### ### # ### ### ### #
### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ###
# # ### # # # ### # #
### ###
### ###
# #
####### ### ####### ####### #####
######### ### ### ## ######### #########
### ### #### ### ### ###
### ### ### ### ### ###
### ### #### ### ### ###
######### ### ## ### ######### #########
####### ### ####### ####### #####
Networking device with Marvell ARM CPU core. 128 MByte SDRAM.
I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
MAC Address : 88:f0:77:d8:a5:03.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from image-1
100%
OK
Running from RAM...
Board ID is 11
Device ID 0xdf7411ab
*********************************************************************
*** Running SW Ver. 1.1.0.73 Date 19-Jun-2011 Time 18:10:49 ***
*********************************************************************
HW version is V01
Base Mac address is: 88:f0:77:d8:a5:03
Dram size is : 128M bytes
Dram first block size is : 98304K bytes
Dram first PTR is : 0x1C00000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x7C00000
Flash size is: 16M
19-Jun-2011 18:10:51 %CDB-I-LOADCONFIG: Loading running configuration.
19-Jun-2011 18:10:51 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SG 300-52
Device 0: GT_98DX3026 (AlleyCat)
Device 1: GT_98DX3027 (AlleyCat)
------------------------------------
-- Unit Standalone --
------------------------------------
19-Jun-2011 18:11:11 %2SWPORT-F-PORTCASCADECONFIG: SW2C_port_cascade_set_fc_hol
_param - Failed to configure port DP profile set cascade port
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.1.0.73 (date 19-Jun-2011 time 18:10:49)
0x169bbc
0x166760
0x696798
0x475c4c
0x47b118
0x47b2d4
0x8bc3b4
0x887fe0
0x88992c
0x88a270
0x917cd8
0x92734c
0x93dff8
0x88c060
0x88df70
0x6af63c
0x1c9d84
0x121d84
**************************************************
***************** SYSTEM RESET *****************
****
i've tried flashing new firmware via xmodem but still have problem.
Please give me some advice.