12-07-2011 07:20 PM - edited 03-16-2019 08:26 AM
Please see attached PHOTO file.
=========================
CCMDB Restore status has been saying "ACTIVE" under the RESULT Column for about 12 hrs now. Still has not completed. The backup is running VERY VERY VERY slow.
Even the ones that say 100% and SUCCESS under the RESULT Column took MANY MANYHOURS.
There is no network problem because this lab test network just has one Cisco 2960 switch with one port going to Publisher and other port going to a SFTP Server running on a Laptop. We took the Publisher OFF it's production network to rebuild the server and restore the database and we are now stuck during restore.
The two ports on the switch have no input or output errors and are running at 100/FDX. Continuous pings of packet size 65000 bytes between this Publisher and the SFTP Server are running without any problem from both ends.
I suspect a H/W problem with this Server. But what H/W do I change? Any other suggestions.
Alphonse