Hi Guys,
Can the ASR1004 RP-1 act like a switch? where i can create SVI,vlans, and switchport mode trunk or access on a particular ethernet interface?
i tried to create an SVI but it failed. the IOS-XE im using is "asr1000rp1-adventerprisek9.03.05.00.S.152-1.S.bin"
Router(config)#interface vlan ?
<1-4095> Vlan interface number
Router(config)#interface vlan 200
^
Similar like a Cisco 3725 with a NM-16ESW module.
Thanks
