cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

SG-300 port lock by bpduguard not visible in webGUI ?

guilty_2
Level 1
Level 1

Hi,

we are starting to replace low budget hubs by the SG-300's.

On the accessports we use BPDUguard and mac security (max 1 user per port).

The newest firmware is used (1.1.2.0).

When i lock a port intentionally by connecting e.g. ports 4 and 5 together (something that happens

quite frequently by user-faillure) i do not see this in the WEB gui.

The CLI does tell me that the port is locked:

gi4      1G-Copper      --      --     --     --  Down*          --     --

*: The interface was suspended by the system.

In the webGUI i can reset the port, but in the CLI i don't get how i should do this. I tried a 'shutdown' followed by a ' no shutdown' on

CLI interface level, but that does not lift the suspension state.

Questions:

- Does anyone know if you can lift the suspension state using the CLI ?

- Is there a way to see the lockdown in the webGUI ?

Who Me Too'd this topic