Please assist,
My voice gateway (Cisco 3945) shows "19 DSP resource allocation failure" when running the command: show voice dsp group all.
sh inventory shows output below:
NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 3", DESCR: "PVDM3 DSP DIMM with 32 Channels"
PID: PVDM3-32 , VID: V01 , SN: FOCXXXXXXXXXXX
NAME: "PVDM3 DSP DIMM with 64 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 64 Channels"
PID: PVDM3-64 , VID: V01 , SN: FOCXXXXXXXXXXX
But I can only configure transcode profile with a maximum of 2 sessions.
Conference and MTP profile configurations fail because there is not enough DSP resources.
Is the DSP resource allocation failure the reason for this?
What could be a solutions for this problem.
Thanks in advance...
