cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Frame-Relay with two Routers(frame-relay switches) in frame-relay cloud

daudparvez
Beginner
Beginner

Hi,

I am using following lab in GNS3 with two routes (frame-relay switches) in Frame-Relay cloud.

The interaces of these two routers connected to each other have been configured with nni type. However, my PVCs are not coming up.

nni.PNG

configurations of the R1 and R6 are as follows:

_______________________ R1_______________________

interface Serial0/0

no ip address

encapsulation frame-relay

serial restart_delay 0

clockrate 1008000

frame-relay lmi-type cisco

frame-relay intf-type dce

frame-relay route 103 interface Serial0/1 553

!

interface Serial0/1

no ip address

encapsulation frame-relay

shutdown

serial restart_delay 0

clockrate 1008000

no frame-relay inverse-arp

frame-relay lmi-type cisco

frame-relay intf-type nni

frame-relay route 551 interface Serial0/0 103

__________________________R6_______________________

!

interface Serial0/0

no ip address

encapsulation frame-relay

serial restart_delay 0

clockrate 1008000

frame-relay lmi-type cisco

frame-relay intf-type dce

frame-relay route 301 interface Serial0/1 551

!

interface Serial0/1

no ip address

encapsulation frame-relay

serial restart_delay 0

clockrate 1008000

no frame-relay inverse-arp

frame-relay lmi-type cisco

frame-relay intf-type nni

frame-relay route 553 interface Serial0/0 301

May be I am missing some command.Please help in resolving the issue.

Best Regards,

!

Who Me Too'd this topic