cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Beginner

No Dialtone on FXS ports on MGCP VG202

Hi All,

I have configured a VG202 gateway using MGCP on my CUCM version 8.5.I have also configured a Analog port which shows as registered on my CUCM.

However, I am getting no dialtone on the analog phone I have plugged in on the FX 0/0 port.

When I call the DN allocated to that port from a IP phone, i can the ringing tone and the light on the VG202 for that port goes on. But on the analog handset I get nothing.

See my config on the VG202 below.

Thanks for your help in advance. Let me know if any other details would help troubshooting this.

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname lonfgw01

!

boot-start-marker

boot-end-marker

!

logging message-counter syslog

enable secret 5 $1$n0XN$9v/ZD6rKywN1YGFxHVIFW0

!

no aaa new-model

ip source-route

!

!

!

!

ip cef

ip domain name fqm.internal

no ipv6 cef

!

!

!

voice-card 0

!

archive

log config

  hidekeys

!

!

!

interface FastEthernet0/0

ip address 10.12.0.4 255.255.255.0

speed auto

full-duplex

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 10.12.0.1

!

no ip http server

!

!

!

control-plane

!

!

!

voice-port 0/0

!

voice-port 0/1

!

ccm-manager redundant-host 10.22.16.41

ccm-manager mgcp

ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server 10.22.16.41 

ccm-manager config

!

mgcp

mgcp call-agent 10.22.16.42 2427 service-type mgcp version 0.1

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

mgcp package-capability sst-package

no mgcp package-capability res-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp rtp payload-type g726r16 static

mgcp bind media source-interface FastEthernet0/0

!        

mgcp profile default

!        

!        

!        

dial-peer voice 99900 pots

service mgcpapp

port 0/0

!

dial-peer voice 99901 pots

service mgcpapp

port 0/1

!

!

!

line con 0

no modem enable

line aux 0

line vty 0 4

password cisco

login

!

end

lonfgw01#

Who Me Too'd this topic