05-17-2012 07:06 AM - edited 03-16-2019 11:13 AM
I've googled this to death and can't find a solution, I'm hoping that someone here can point me in the right direction.
I have a 7970 hooked up to call manager express 8.0 running on a 2851. The 7970 will register only if set to factory defaults each time. Once its registered, and then its reset, it goes to the updating screen and errors out, or sits at registration and never connects up. This started when I tried to fix the clock on the 7970.
So, in trying to fix this I downloaded the latest firmware for the 7970 (sccp 9-2-3TH1-9), tftped the term70.default.loads and the other files to the flash and gave the load 7970 term70.default.loads.
I get the following error:
Updating CNF files
CNF-FILES: Clock is not set or synchronized, retaining old versionStamps
CNF files update complete for phonetype(7970)
The clock is set, and I have NTP in there, which doesn't seem to be working properly. I also tried removing the NTP, same results.
CME#sh clock
*21:18:49.104 EDT Wed May 16 2012
CME#sh calendar
21:18:53 EDT Wed May 16 2012
CME#
Any help would be greatly appreciated.
Best,
David
Solved! Go to Solution.