03-23-2012 07:03 AM - edited 03-16-2019 10:16 AM
Hi,
I am trying to achieve the following scenarios.
i have got three anolog lines running into three fxo ports on a Cisco 2621xm. i have a cucm 6.0 and the cisco 2620xm is connected as a h.323 gateway.
i have 3 extension numbers 1000, 1001 and 1002. i want that
1000 should always dial via fxo 1/0/0
1001 should always dial via fxo 1/0/1
1002 should always dial via fxo 1/1/0
how do i configure both the cucm and gateway to achive the following. the ip phone extensions will always dial out by using 0.
Thanks in advance.
Rustom Billimoria
Solved! Go to Solution.