Hello,
I have a C2960-C (2960C-12PC-L) running the latest ios version (12.2(55)EX3).
I'm trying to configure routing on it via a static route and a couple of VLAN interfaces.
I have loaded the lanbase-routing SDM template, which loads fine, but I'm still not able to configure routing.
I cannot configure "ip routing" or "ip route...".
Accouding to the release notes of the IOS, it should support routing starting from this version:
Starting with Cisco IOS Release 12.2(55)EX3, Catalyst 2960-C Fast Ethernet switches support multiple templates: default, dual IPv4 and IP v6, LAN base routing, and QoS. All Catalyst 2960-C templates support 0 routed interfaces and 255 VLANs, except for the LAN base routing template, which supports 8 routed interfaces.
source: http://www.cisco.com/en/US/docs/switches/lan/catalyst2960c_3560c/software/release/12.2_55_ex/release/notes/ol23942.html#wp1101585
Anyone who has experienced the same problem?
Am I missing something?
If any further info is required, just ask!
Thanks in advance.
