Hello guys,
I'm having difficulties here on assigning different extension to different voice-port. Currently I have 4 incoming lines (PSTN) to my FXO port router (c2911). Lets say if I wanted to assign 2 FXO ports to specific extension and the remaining FXO ports is for others extension, how the configuration looks like?
!
trunk group Staff_FXO
!
trunk group Operator_FXO
!
voice-port 0/1/0
trunk-group Staff_FXO
!
voice-port 0/1/1
trunk-group Staff_FXO
!
voice-port 0/1/2
trunk-group Operator_FXO
!
voice-port 0/1/3
trunk-group Operator_FXO
!
For example, I have these extension numbers : 2001,2002,2003,2004,2005,2006,2007,2008
I want to assign extension 2001,2002,2003 and 2004 to use voice-port 0/1/0 and voice-port 0/1/1 for incoming/outgoing calls while extension 2005 to 2008 using voice-port 0/1/2 and voice-port 0/1/3. How the dial-peer configuration looks like? Much appreciated if you guys can assist me on this.
Regards,
Zulfadli Zakaria
