I am connecting to a corporate network using VPN Client 5.0.07.0410. I can successfully connect, but after around anywhere from 10 to 60 minutes after connecting, I am getting a BSOD error (DRIVER_IRQL_NOT_LESS_OR_EQUAL).
Configuration:
Dell Optiplex 380
Intel Core 2 Duo E7500 2.93Ghz
3.21GB of RAM
Windows XP Pro 2002 SP3
VPN Client 5.0.07.0410
Symantec Endpoint Protection 11.0.7200.1147
History:
First installation of the VPN Client caused problems with the network adapter mid way through the installation, resulting the PC being unable to connect to the local network. After a Windows roll back and a new installation of the VPN client there were no apparent issues.
Analysis:
I have searched the web and this site which indicates the problem may be related to the Cisco System VPN Adapter driver, but I believe I am using the latest version.
C:\WINDOWS\system32\DRIVERS\CVirtA.sys
Date 19/01/2007
Version 5.0.0.1
What else could be the problem here?
Your help is appreciated, thank you in advance.
=================================
A problem has been detected and Windows has been shut down to prewent damage
to your computer.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000008, 0x00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
=================================
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 24/07/2012
Time: 2:58:45 PM
User: N/A
Computer: SSECSY02
Description:
Error code 100000d1, parameter1 00000000, parameter2 00000002, parameter3 00000008, parameter4 00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 30 2c 20 000000,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 38 2c 20 30 30 30 30 08, 0000
0050: 30 30 30 30 0000
=================================
