Hi all,
I've been troubleshooting an issue with Nexus 7010 dealing with site adjaceny. I have four 7ks (two at each site). Site1-N7K1 is linked via DWDM to Site2-N7K1 over a layer 3 link (the join interface) and this forms an adjaceny. The same happens with Site1-N7K2 and Site2-N7K2.
However I can't get a full adjacency from the N7Ks in the same site over a layer 2 link, even though the site VLAN is definitely up. This is the output from 'sho otv site':
Site1-N7K1# sho otv site
Local Edge Device Information:
Hostname Site1-N7K1
System-ID 4055.3906.99c1
Site-Identifier 0000.0000.0001
Site-VLAN 789 State is Up
Site Information for Overlay1:
Local device is AED-Capable
Neighbor Edge Devices in Site: 1
Hostname System-ID Adjacency- Adjacency- AED-
State Uptime Capable
--------------------------------------------------------------------------------
(null) 64a0.e740.8741 Partial 2d21h Yes
Does anyone have any ideas on what could be causing this? When I do a 'show ip mroute' I only see an entry for the L3 join interface, I'm not sure if this is the problem.
Mark
