Hi all,
I have enabled HSRP on 2 Layer 3 switches A and B.
They both connect to different layer 2 switches.
Layer 3 switches A and B connect directly with each other on gi 1 and 2 ports.
Switch A has standby ip priority config for vlan 10 and 20 as 150 so that it remains active.
This is what i tested.**********************************************************************
when i shutdown the ports gi 1 and 2 then
Both switches A and B become active for vlan 10 and 20.
There Standby router is unknown undr vlan 10 and 20 for both layer 3 switches.
Need to know why both switches become active for vlan 10 and 20 after i shutdown ports connecting them.?????????
Before shutting down ports Switch A was active for both vlans 10 and 20.
Thanks
MAhesh
