cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

RV042 multiple subnets

I have an RV042 running the most recent firmware, and I'd like to

know if the following is possible:

I'd like to have two subnets, 192.168.1.0/24 and 192.168.2.0/24

I'd like to have DHCP available on both, with some static DHCP assignments on both.

I'd like to have each subnet assigned to a port on the back of the router.

Example:

You plug a laptop into Port 1, and you get an address like 192.168.1.xxx

You plug a laptop into Port 2, and you get an address like 192.168.2.xxx

How would I make this happen?

Who Me Too'd this topic