cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

media master does not allow change to extension after install of Viewmail

vhinckley
Level 1
Level 1

In an attempt to find out if Viewmail 8.5.6 would be useful to my company, I had installed it on my system (Windows 7 64-bit; Outlook 2010). Unfortunately, after installation, the Media Master ActiveX controller that is used to record greetings in Unity became "locked" to my account, preventing me from sending the recording option to a different phone number. When clicking Options, then Playback and Recording, I no longer get a pop-up allowing me to change my setttings from there. I cannot even get the Help/About Media Master screen to open. Even after uninstalling Viewmail, I am still having this problem. The only info I can get from the system is from a file called mm.properties, which contains the following text:

#Fri Jul 27 15:46:19 MDT 2012

playback.speed=500

log.system.trace.global.level=WARN

playback.volume=500

TestId-active.phone.number.source=trap.preferred.phone.extension

mm-conf-version=0.0.0.0

TestId-local.playback.speed=500

log.system.type=mmlog

mm-conf-created-on=2012-07-27 11\:29\:53.628 Mountain Daylight Time

TestId-trap.preferred.phone.extension=3216

TestId-active.record.device=phone

mm-conf-creator=vhinckle

TestId-trap.selected.extension=3216

TestId-active.review.device=local

mm-conf-creator-id=TestId

TestId-playback.volume=500

active.phone.number.source=trap.unity.subscriber.extension

active.record.device=phone

active.playback.performance=stream

active.review.device=local

I think the one of the bold, underlined, lines might be the culprit, but I cannot figure out where it is still pulling this information from. Any help would be greatly appreciated!

Who Me Too'd this topic