07-14-2012 12:06 PM - edited 03-16-2019 12:12 PM
i have hard time trying to make CUBE send 180 Ringing with SDP after receiving it from my softswitch but CUBE coverts 180 w/SDP to 183 session in progress w/SDP, this cause some callers from ITSPs and PSTN ( calling inbound ) not hearing Ring tone resulting in a large number of incomplete calls,
i noticed this issue was brought up in cisco support community last year but no answer till now, check link below.
https://supportforums.cisco.com/message/3683734#3683734
so how can i make cube forward sip 180 w/SDP without converting it to 183 w/SDP without using the disable-early-media 180 command as early media is required
I