cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Nexus 5010 Won't Load System Image - Stuck at Boot Prompt

eh2os
Level 1
Level 1

I have a 5010 that simply won't load any system image.  Loads the kickstart image just fine, but once at the Switch(boot)# prompt just give me garbage when I enter "load bootflash:n5000-uk9.5.1.3.N2.1b.bin

Restarting system.


Loader Version pr-1.3

loader> dir
bootflash:
  lost+found
  n5000-uk9-kickstart.5.2.1.N1.1b.bin
  n5000-uk9.5.2.1.N1.1b.bin
  n5000-uk9-kickstart.5.1.3.N2.1b.bin
  n5000-uk9.5.1.3.N2.1b.bin

loader> show version
Version is pr-1.3

loader> boot fb
Booting kickstart image: fb....
Error 15: File not found

loader> boot bootflash:n5000-uk9-kickstart.5.1.3.N2.1b.bin
Booting kickstart image: bootflash:n5000-uk9-kickstart.5.1.3.N2.1b.bin....
...............................................................................
.................................Image verification OK

ÿserial 00:04: unable to assign resources
INIT: platform_type cmdline parameter not found. Asssuming Oregon.
I2C - Mezz absent
sprom_drv_init_platform: nuova_i2c_register_get_card_index
Starting Nexus5010 POST...
  Executing Mod 1 1 SEEPROM Test......done
  Executing Mod 1 1 GigE Port Test.......done
  Executing Mod 1 1 Inband GigE Test.....done
  Executing Mod 1 1 NVRAM Test....done
  Executing Mod 1 1 PCIE Test...............................done
  Mod 1 1 Post Completed Successfully
  Mod 2 Post Completed Successfully
POST is completed
can't create lock file /var/lock/mtab~185: No such file or directory (use -n flag to override)
nohup: redirecting stderr to stdout
autoneg unmodified, ignoring
autoneg unmodified, ignoring
Checking all filesystems..... done.
Warning: switch is starting up with default configuration
Loading system software
No system image
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)# dir
      16384  Jan 01 2005 20:57:47  lost+found/
   34349568  Jan 10 2005 20:05:23  n5000-uk9-kickstart.5.1.3.N2.1b.bin
   31642624  Jan 09 2005 04:23:49  n5000-uk9-kickstart.5.2.1.N1.1b.bin
  172705188  Jan 10 2005 20:34:02  n5000-uk9.5.1.3.N2.1b.bin
  173082673  Jan 09 2005 22:07:23  n5000-uk9.5.2.1.N1.1b.bin

Usage for bootflash: filesystem
          0 bytes used
2147483647 bytes free
2147483647 bytes total

switch(boot)# load bootflash:n5000-uk9.5.1.3.N2.1b.bin
INIT: Sending processes the TERM signal
INIT: (boot)#
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#

Any help greatly appreciated.

Who Me Too'd this topic