12-20-2012 12:14 PM - edited 03-20-2019 07:59 PM
I'm getting an odd error, permission denied trying to issue "show config" at user level. We use this throughout the environment with no issues.
IOS: System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T.bin"
R1#sh run | i aaa
aaa new-model
aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting commands 15 default stop-only group tacacs+
aaa session-id common
R1#sh run | i priv
privilege exec level 1 traceroute
privilege exec level 1 ping
privilege exec level 1 show logging
privilege exec level 1 show configuration
privilege exec level 1 show privilege
privilege exec level 1 show
R1#disable
R1>show config
Using 11855 out of 262136 bytes
%Error opening nvram:/startup-config (Permission denied)
Solved! Go to Solution.