cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Cisco 1941W - AP Module looses configuration at reload

juanvladimir
Level 1
Level 1

Hi Guys,

Something strange is happening to my Cisco 1941W. Every time I reboot the router i loose the running configuration of the service-module (Access Point module). The weird thing is that the router's configuration remain the same. I made sure i save the configuration by issuing the wr command on the service module console but still happens. My router's current IOS version is 15.0(1)M1 and my AP's is 12.4(21a)JA1.

I also did another test by making sure the startup-configuration was identical to the running configuration and when I reload the router still happens.

This is very weird and annoying. Any ideas of what could be causing this issue?

Vladimir

Who Me Too'd this topic