cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Gets CRC errors by OID snmp

Natha340Mai340
Level 1
Level 1

Hello, I tried get the errors CRC for interfaces router 2801 by snmpwalk as follow but unsucessful with OID .1.3.6.1.4.1.9.2.2.1.1.12

snmpwakl -c community -v 1 IP_router .1.3.6.1.4.1.9.2.2.1.1.12

SNMPv2-SMI::enterprises.9.2.2.1.1.12.1 = INTEGER: 0

SNMPv2-SMI::enterprises.9.2.2.1.1.12.2 = INTEGER: 0

SNMPv2-SMI::enterprises.9.2.2.1.1.12.3 = INTEGER: 29

SNMPv2-SMI::enterprises.9.2.2.1.1.12.4 = INTEGER: 0

SNMPv2-SMI::enterprises.9.2.2.1.1.12.6 = INTEGER: 0

SNMPv2-SMI::enterprises.9.2.2.1.1.12.19 = INTEGER: 0

SNMPv2-SMI::enterprises.9.2.2.1.1.12.23 = INTEGER: 0

appear this return above but when I go look the interfaces on router with command "show interfaces" the value are diferents.

for exemplo, for ifIndex 3 the command returned 29 CRCs that is incorrect because when I look by command line there aren't any CRC errors for that Interface.

so I think there is something missing in my router or on the search by snmpwalk. maybe that OID doesn't been the correct.

how can I do ? I would like use gets snmps.

any tips is welcome.

Who Me Too'd this topic