Hi
I've just setup a WAP321:
- 2 vlans: 200 & 250
- ip address on vlan 200 (management)
- SSID on vlan 200
- SSID on vlan 250
The LAN port is connected to Cisco Catalyst (Trunk 200,250).
In vlan 200, there is the customer lan
In vlan 250, there is a box to access to internet.
SSID associated to vlan 200 works properly. But the captive portal associated to vlan 250 doens't work...
When we connect to it, and the captive portal is off, we can access to internet (the box give an ip address). But when I setup the captive portal to vap2 (vlan250), we can't access to internet (but the DHCP works properly). We have access to nothing, the page in the browser is blank.
I suspect a mistake with DNS configuration. I have read that the captive portal needs to be associated to vap0, is it true?
In attached files, the wap321 config.
Thanks for your help
