01-31-2013 10:45 AM - edited 03-07-2019 11:26 AM
Using a 4948E switch with FastEthernet1 as the management interface which uses the VRF mgmtVrf. I cannot get DNS resolution to work for some reason.
I am using code enterprise 15.1-2.SG and here are the relevant config snippets:
ip domain-lookup source-interface FastEthernet1
ip domain-name domain.com
ip name-server 4.2.2.1
ip name-server 4.2.2.2
!
interface FastEthernet1
vrf forwarding mgmtVrf
ip address 192.168.20.10 255.255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
speed auto
duplex auto
!
ip route vrf mgmtVrf 0.0.0.0 0.0.0.0 192.168.20.1
If I try to ping using a host name it fails, even if I specify to use the VRF.
SWITCH#ping vrf mgmtVrf google.com
Translating "google.com"...domain server (4.2.2.1) (4.2.2.2)
% Unrecognized host or address, or protocol not running.
I read online there are some commands in a different code that support specifying the VRF along with the name servers, but I don't have those options. All I can do is set the source-interface on the domain-lookup command.