Hi everyone.
I have a UCS C240 M3 for a demo with the following hardware.
UCS C240 M3 SFF2 1xE5-2609 1x8GB ROM55 2x650W SD RAILS |
SMARTNET 8X5XNBD UCS C240 M3 S2 Server-SFF |
2.4 GHz E5-2609/80W 4C/10MB Cache/DDR3 1066MHz |
8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v |
Power Cord 250VAC 10A CEE 7/7 Plug EU |
UCS 2.5 inch HDD blanking panel |
Heat Sink for UCS C240 M3 Rack Server |
Full height PCIe filler for C-Series |
Half height PCIe filler for UCS |
650W power supply for C-series rack servers |
Embedded SW RAID 0/1/10/5 8 ports SAS/SATA |
2U Rail Kit for UCS C-Series servers |
16GB SD Card Module for C240 Servers |
In adittion these HD.
300GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted x 2
I have pluged the HDs to the 1 and 2 bay but the system tell me "Not Hard Drive Found" so it doesn't permit me any RAID configuration.
Every LED on the HD and the Server is green so everything aparently is ok.
The firmware is 1.4(6)
Any ideas?
Thank you.
Best Regards
