11-22-2012 12:49 PM - edited 03-07-2019 10:12 AM
In our test environment I upgraded Sups 720 to Sups 2T. The Sups 2T came with IOS 15.0.1. Looking at to the latest IOS; I found IOS 15.5.1. I upgraded to this version and things seem to be working OK. In the web site, there is also image s2t54-boot-mz.SPA.151-1.SY.bin. Do I need to upgrade the boot image as well? If so, how do I do this? I haven’t been able to find information in Cisco’s web info. Bootvar nor version commands show me which boot image the supervisors 2T are running. Thank you for any information. Router#show bootvar BOOT variable = bootdisk:s2t54-adventerprisek9-mz.SPA.151-1.SY.bin,1; CONFIG_FILE variable = BOOTLDR variable = Configuration register is 0x2102 Standby BOOT variable = bootdisk:s2t54-adventerprisek9-mz.SPA.151-1.SY.bin,1; Standby CONFIG_FILE variable = Standby BOOTLDR variable = Standby Configuration register is 0x2102 |
Router#show ver
Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 09-Oct-12 14:43 by prod_rel_team
ROM: System Bootstrap, Version 12.2(50r)SYS2, RELEASE SOFTWARE (fc1)
Router uptime is 1 hour, 49 minutes
Uptime for this control processor is 1 hour, 50 minutes
System returned to ROM by reload at 18:50:50 UTC Thu Nov 22 2012
System image file is "bootdisk:s2t54-adventerprisek9-mz.SPA.151-1.SY.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco WS-C6509-V-E (M8572) processor (revision ) with 1785856K/262144K bytes of memory.
Processor board ID FOX1338GSWR
CPU: MPC8572_E, Version: 2.1, (0x80E80021)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Last reset from s/w reset
2 Virtual Ethernet interfaces
44 Gigabit Ethernet interfaces
12 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.
Configuration register is 0x2102