Hi there,
Could connect an ATA-187 on a cme 9.1 and doing calls. Is there a setting to set-up T.38 fax relay for the DN on the ATA?
An how can a transfer/hold e.g. be done, when an analog phone is pluged in the ATA-187?
Thanks a lot,
Norbert
-----------------------------------
Here my setup:
...
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 nse force version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
h323
h245 caps mode restricted
sip
registrar server
asserted-id ppi
....
voice register global
mode cme
source-address 192.168.115.1 port 5060
timeouts interdigit 4
max-dn 200
max-pool 42
authenticate register
authenticate realm all
timezone 23
time-format 24
date-format D/M/Y
tftp-path flash:
file text
create profile sync 0322123411327956
network-locale CH
user-locale DE
...
voice register dn 1
number 281
name Fax(281)
!
voice register pool 1
id mac F029.29E2.902B
type ATA-187
number 1 dn 1
username ata1 password 1234
codec g711ulaw
no vad
....
