cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

N1000v 4.2(1)SV2(1.1) Memory status alert

sokarlsson
Level 1
Level 1

One of our customers see a lot of these in the active VSM.

Both Primary and secondary are installed as VMs on ESXi 5.1.0 Releasebuild-799733

%PLATFORM-2-MEMORY_ALERT: Memory Status Alert : MINOR ALERT RECOVERED

%PLATFORM-2-MEMORY_ALERT: Memory Status Alert : MINOR

The timeframe between "RECOVERT" until the alarm is set again are usually just a few seconds hence the status is usually alert if one go by the logs.

Repeating the command "show system internal memory-status " also gives me the the status

"MemStatus: Minor Alert "

Passive one looks OK

From the active VSM again

vsm01# show system resources

Load average:   1 minute: 0.18   5 minutes: 0.09   15 minutes: 0.07

Processes   :   287 total, 1 running

CPU states  :   0.0% user,   1.0% kernel,   99.0% idle

Memory usage:   2075740K total,   1817172K used,    258568K free

                 104604K buffers, 1065164K cache

I'm not going to throw in the complete output from "show process mem" to start with but the total process mem allocation is

All processes: MemAlloc = 414822400

This I guess is in bytes as usual for Cisco so it only counts for 414MB och the 1,7GB used.

The system message guide for NX-OS only explination is to contact TAC.

Who Me Too'd this topic