02-27-2013 12:09 PM - edited 03-11-2019 06:07 PM
Hi Everyone,
My Expertise with Cisco ASA is Very less. I have observed Input errors in a Couple of Interfaces in Cisco ASA 5540 Firewall.
296867 input errors, 0 CRC, 0 frame, 296867 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
102091138038 packets output, 96596756282996 bytes, 2683 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 2 interface resets
0 late collisions, 0 deferred
52 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (255/230)
output queue (blocks free curr/low): hardware (255/0)
I need to Clear the Input errors on this particular Interface.
Will Clear interface GigabitEthernet 0/0 will help?
Thanks in Advance,
Nanda
Solved! Go to Solution.