02-28-2013 03:51 PM - edited 03-18-2019 12:41 AM
We have a customer who is using the CTS-500 as an external display for a VP's Mac Book Air. The default picture image on the CTS-500 does not go full screen.
I have provided the person on-site with the below information; however, they want to know if there is a setting on the display that will change the screen resolution when the Mac Book Air is connected.
http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_8/userguide/cts_ug_tools.html#wp1084800
Using the CTS 500-32 as a Secondary Display
The CTS 500-32 screen is available for use as a secondary monitor for your laptop when not in a call. The following are tips for using the CTS 500-32 as a secondary display for your laptop:
•If you have a document camera and a Cisco Digital Media Player (DMP) connected to the CTS 500-32 and the document camera video does not display during a conference, use the View softkey on the Cisco Unified IP Phone to view the document camera video.
•For sharing presentations when not in a conference, set your resolution to 1024 x 768 @ 60 Hz.
•For using the CTS 500-32 as a computer monitor (local viewing) when not in a conference, you can choose from the following resolutions:
–800 x 600 @ 60 Hz
–1024 x 640 @ 60 Hz
–1024 x 768 @ 60 Hz
–1280 x 800 @ 60 Hz
–1280 x 720 @ 60 Hz
–1920 x 1080 @ 30 Hz